Facts and Information on Water Filtration System

Drinking clean and safe water is one of the vital needs of every human being living on Earth. How much water do you drink every day, anyway? I do hope you are aware that insufficient intake of water may lead to various health problems, such as dehydration and irregular bowel movements. What about your personal hygiene, do you take a bath every day? Are you aware that, if you are not going to wash and clean your body regularly, then that may cause you health problems, such skin irritations and allergies?

Can you see now how important water is in your daily lifestyle? We are not only talking about potable water here, but we are also referring to the water for your personal necessities. By the way, what you need is clean and safe water and not just the ones that are passing through your building or home’s pipelines. Those are not always safe because pipelines may rust and break after some time. If your pipelines had been there for ten years now, then how sure are that it is still safe and clean?

When considering a real, safe and clean water to use at home or in commercial buildings, all you need to count on is a water filtration system. This is a device or machine that helps in eliminating impurities in the water that may be harmful to your health. Being new to this machine would be very interesting. So, what you need to know about water filtration systems like facts and information are elaborated here for your awareness.

Types of Water Filtration systems

The type of water filter that is commonly used for a household is the activated carbon or AC, which is based from a porous type of carbon like charcoal. With this type, a process called adsorption is applied, where chemical impurities, such as chlorine and industrial solvents are trapped. This type requires you to replace the filter once it is already clogged up.

Another type of water filtration system is the reverse osmosis. Here, the impurities are left behind as the water pass under pressure through a very fine filter. This process requires electrical pumps to complete the procedure. This type is also good at removing impurities like nitrates, but it is not very effective in removing bacteria. Another thing for you to consider is that this type produces waste water because it only allows clean water to pass through its filter.

Now, if you are looking for a type of water filter that can remove limescale, then all you need to install at home is the ion exchange filters. With this filtration system, bad ions or the contaminated substances are exchanged with good ions. The filters contain zeolite beads with sodium ions while water contains compounds, such as calcium and magnesium. It is also in this filter, where the splitting of compounds occur and where water compounds are trapped. Since these compounds are left behind, then that makes the water softer in taste. Check this out for more facts and information about zeolites.

How the system works?

The process of that water undergoes during the filtration system is very simple. Whatever type of filter you would like to install at home are aiming at the same goal, anyway – to remove impurities and make the water clean. During the process, the impurities or limescales are physically filtered or strained, using a fine membrane.

But, now that we have a more advanced technology, those impurities can be filtered through a combination of a physical and chemical filtering. But, the process is still the same because the water will pass through a material and then, at the same time removing the impurities chemically.

This system would be very helpful to you and your family’s health because we are not sure nowadays, where the water is coming from, what type of impurities are contained in the water and how safe is the water that passes through your pipelines as well as the pipes that are tunneled under the ground. It is still best to take extra care and to prevent our loved ones from acquiring waterborne diseases.

What is being filtered or removed?

Water filters are an effective way of removing different contaminants or impurities. But, not all filtration systems can remove everything because it will depend on the type of filter. A physical filter like backwashing or cartridge filters may remove sand, dirt, silt and sediments from the water. These may damage an active chemical filter, so it must be filtered first before the water pass through a finer filter. The link at https://dengarden.com/home-improvement/How-to-Replace-a-Culligan-Sediment-Cartridge-Filter-Models-HF-150-160-360-and-most-standard-sizes will tell you more about replacing this cartridge.

Sometimes, there are chemicals or ions that were dissolved in water and so, this must be removed. That is why it is also important to use chemical filters. Chlorine and chlorine are also some of the chemicals that must be eliminated though they are effective chemicals in killing bacteria. If you will notice running water from your tap contains chlorine, right? But, sometimes this adds bad odor and taste to the water and then, too much chlorine is not also good for the health. Therefore, some individuals would like to eliminate this and that is through an active chemical filter.

There are also filters that are specifically designed to filter and remove iron as well as sulfur. To remove and filter iron, you must install an oxidizing filter. Of course, it will undergo a certain process, too. It must be oxidized for it to be solidified, which would be easier for this to be filtered. Now, if you would like to remove fluoride from the water, then it is ideal for you to install a reverse osmosis type of filtration system. I know that you may also boil water before drinking, but it is not always a solution that is suitable to an individual’s daily workload. This is a traditional way of keeping the water safe to drink, but it is not an ideal solution, especially we do not know what chemicals or impurities are contained in the water today.